Icon / Paychex Replacement Wall Mounting Plate – Guaranteed Fit (M1025-01)
Need to remount your Icon or Paychex time clock? This replacement wall mounting plate is designed to attach the clock securely to the wall using the correct tab-and-lock alignment. It is a common replacement when the original bracket is misplaced during a move, the plastic tabs wear out, or a clock is relocated to improve employee traffic flow.
This mounting plate fits many Icon terminals and Paychex PST terminals, including Icon TimeCalculator/EPM, Icon Prox, RTC1000, SB100, and TotalPass time clocks (PIN, Proximity, and Biometric). It also fits Paychex PST 1000 and PST InVision terminals. Part number: M1025-01.
Mounting plate specifications
- Approx. 3" wide x 6" tall
- Two wall screw holes
- Three clock tabs (two at top, one centered bottom)
For best results, mount the clock at a consistent height (employees shouldn’t need to twist the badge/card as they clock in), and anchor into studs or use proper wall anchors for your surface. If you’re not sure which plate your terminal needs, Florida Time Clock can help you verify fit by comparing your current bracket pattern or the slots on the back of the unit.
FAQ
Which models does this plate fit?
It fits many Icon families plus Paychex PST 1000 / InVision terminals. Confirm the tab pattern matches your unit. :
My clock is newer—will it still work?
Most compatible families use the same bracket style, but always verify before ordering to avoid delays.
Can you help with installation questions?
Yes—if you need guidance on mounting height, anchors, or fit verification, contact our support team.